Using illustrative examples, examine why competition authorities might Essay

Using illustrative examples, examine why competition authorities might be concerned about the way large companies behave - Essay Example It has been evident that many large firms indulge in unfair competition to gain advantage over their competitors by unfair means (Hewitt, Clark and Phillips, 2009); therefore competition authorities across the world are concerned about their behaviour. Firms grow so large that unilaterally they harm competition through monopolising the market and take advantage of their size to block threats arising from potential or existing competitors (Hewitt, Clark and Phillips, 2009). For example Microsoft the world’s largest software company indulge in similar such practices that denied other software companies an opportunity to build and market products competing with Microsoft’s products by building licensing agreements that were restrictive, exclusionary and unreasonable and thus monopolizing the client operating- system market by anti- competitive strategies (Justice, 1994 and Bloomberg, 2012). Large companies often make vertical or horizontal agreements with other firms called as cartel to fix prices not considering the reaction of either of its rivals or customers. Dominant firms fix higher price knowing that their customers have few alternatives and little choice other than accepting the firm’s offered higher price (The Competition authority (a), 2013). For example Automobile giant Daimler Mercedes-Benz found guilty of fixing prices in collaboration with five of its van and truck dealers, also shared sensitive commercial information and to some extent market sharing that negatively affected the competition in UK market however they were fined by UK’s antitrust authority of about  £2.6 Million (Reed, 2012 and Binham, 2013). Apart from fixing prices they also control markets or production or make agreements to share markets or supply sources so that rivals supply sources gets restricted. When doing business with other trading parties they put different

Judaism Essay Example | Topics and Well Written Essays - 1250 words

Judaism - Essay Example Judaism's â€Å"Talmud† further explores and explains the religion's teachings, principles, and ethics. According to history, Judaism started with the Covenant between the patriarch, God, and progenitor, Abraham, of the Jews (Abrahams, 2008). The religion is still in practice today and has influenced other world religions like Islam and Christianity. Unlike the other religions in the contemporary world, the central authority in Judaism does not lie in the hands of single individual or group rather in holy writings, traditions, and learned Rabbis who give meaning to those writings and laws of the religion. Judaism has existed for thousands of years already but it remains loyal and true to most of its religious principles (Abrahams, 2008). Among its principles, the most important is the belief in one, omniscient, all powerful, kind, encompassing God, who made the universe and continues to oversees it. The traditional Jewish faith states that the God who made the universe created a covenant with the Israelites, and disclosed his laws and teachings to Moses on Mount Sinai in both the Written and Oral Torah forms, and the Jews are the progenies of the Israelites. It is the study and the observance of God's laws and teachings, as indicated in the Torah and further explained in the Talmud, that the traditional practice of Judaism revolves (Abrahams, 2008). As mentioned, the most important teaching of Judaism is the principle of Monotheism, or Unity of God that serves as the foundation of the religion. The Jews' faith in their one God is more than just being part of their religion. It is a passion and an inspiration that gives them the power and strength to endure tribulations and death. Many people believe that woman are discriminated against in the religious practice of Judaism when Judaism points out that God has both masculine and feminine qualities. It is also said that both man and woman are created in the image of God. This misunderstanding of inequality in men and women is interpreted by the higher power of men up until this very century (BBC, 2012). Most religions commemorate, or celebrate, with certain traditions. As for the Jewish traditions, they have a collection of ritual objects. First is the Yarmulke. This is a small cap that reminds the Jews that they must always live by the words of God at all times and in all places. Next there is the Tefillin. This object is a small leather box that has straps attached that are worn on the left forearm and on the forehead. The inside of these boxes contain scriptures, including the Shema which are little prayers written in the Jewish language. Finally, the last traditional wear is the Tallit. The Tallit is a prayer shawl with fringes that remind them of the commandments of the Torah. They put it on before prayer and worship. Another tradition, and a less amusing ritual, is the Brit Milah. To us, that is a Circumcision. Every baby boy on exactly their eighth day of life is circumcised. T hey also have traditions known as, Bar Mitzvahs for boys, or Bat Mitzvahs for girls. There is also the Baby-naming Ceremony. This tradition is slightly different today, in which many families chose to do this in their own homes, rather then in the Synagogue. A lot of holidays are celebrated with Judaism and they are not the average holidays. One such holiday is called the Passover. This is simply a celebration of the Jewish nation. On this holiday, that takes place on the fifteenth day of the Hebrew month, a Passover Seder is performed. This is where the Jews tell the story of Exodus while they endeavor to transition their life condition from slavery to emancipation. The

Biomedical instrumentation and measurement

Biomedical instrumentation and measurement INTRODUCTION: SA node controls the rate of hearts muscular contractions which enables the heart to circulate the blood throughout the body according to the need. Small variations in the heart beat are not harmful but in some cases due to malfunctioning of the hearts electrical system, the heart rate varies drastically resulting in different types of arrhythmias. These cardiac arrhythmias are serious disorders which should be treated immediately. Arrhythmias like bradycardia (low heart rate) can be treated using Pacemakers. Pacemakers can be implanted in the patients heart for permanently stimulating the heart. It is used for patients for whom the SA node is no longer functioning properly. External Pacemakers are also available which is used to treat temporary heart rate variations. It is used for a short period of time before the implanting the Internal Pacemakers in the heart. In order to understand the requirement of pacemakers, it is necessary to understand the functioning of the heart and its electrical system. HEART ITS ELECTRICAL SYSTEM: Heart is a pumping device which is used to circulate the blood throughout the body. It has four chambers namely Right Atrium, Left Atrium, Right Ventricle and Left Ventricle. The right atrium receives the deoxygenated blood from the entire body through the superior vena cava and inferior vena cava. The left atrium receives oxygenated blood from the lungs through the pulmonary veins. When the atrium contracts the blood flows to the corresponding ventricle. This is due to atrial depolarization. When the left ventricle contracts, the oxygenated blood is supplied to all tissues in the body through the aorta. This is due to ventricular depolarization. Similarly, the deoxygenated blood is pumped to the lungs for oxygenation through the pulmonary artery during the contraction of right ventricle. This is due to ventricular repolarization. The Electrical conduction system of the heart consists of SA node, AV node, Bundle of His, Purkinje Fibers. The chambers of the heart should be stimulated electrically for contraction. The stimulations are provided by the SA node (Natural Pacemaker of the heart) which is located in the right atrium of the heart near the entrance of the superior vena cava. Although all the heart cells have the ability to produce electrical pulses which can stimulate the heart, SA node triggers the heart. The fact that SA node produces pulses at a higher rate when compared to other potential cells which can stimulate contraction, contributes to this phenomena. The contraction of various chambers of the heart is characterized in a very specific manner. As the electric pulses pass through each chamber of the heart, they are stimulated to contract. The SA node first triggers the right and left atrium to contract. Then the impulses travel to the AV node which is located between the atria and the ventricles . From AV node ,the pulses travel to the bundle of his. The pulses travel to the individual ventricles through the right and left bundle branch and reach the Purkinje fibers. If the SA node fails, then the AV node acts as the primary pacemaker. If the AV node fails, then the Purkinje fibers takes the responsibility. The SA node receives blood supply from right and left coronary arteries. Under ischaemic conditions, the death of the affected cells will stop the SA node from triggering the heart beat. There is a period of time following the stimulation of heart muscle during which no other action potential can trigger the heart muscles. This period is known as Absolute or Effective Refractory Period (ERP) of heart. It is normally around 0.4 sec. ERP is maintained as high as possible in order to maintain tachycardia and to coordinate the muscle contraction. The anti-arrhythmic drugs taken by the patients usually prolongs the ERP. ELECTRICAL SYSTEM OF HEART ECG ITS SIGNIFICANCE: The electrical activity of the heart muscles is recorded as Electrocardiogram (ECG). It can be acquired non-invasively from the surface of the body by following specific lead configurations. The electrical current generated in the heart due to depolarization and repolarization is spread not only within the heart but also throughout the body. So, ECG can be easily acquired from the surface of the body through electrodes. ECG has four basic components namely, P wave, QRS complex, T wave and U wave. P wave occurs during atrial contraction due to atrial depolarization. The duration of the P wave ranges from 0.08- 0.1 sec. During the atrial depolarization, the impulse from the SA node spreads throughout the atrium. The time period between the onset of the P wave and the beginning of the QRS complex is about 0.12- 0.2 sec. During the zero potential period between the P wave and QRS complex, the impulse travels within the AV node and the Bundle of His.QRS complex occurs during ventricular c ontraction due to ventricular depolarization. The duration of the QRS complex ranges from 0.06-0.1 sec. T wave occurs during ventricular relaxation due to ventricular repolarization. Sometimes, a small positive U wave occurs following the T wave due to the last remnants of the ventricular repolarization. ELECTROCARDIOGAM NORMAL AND ABNORMAL ECG WAVES: Normal ECG: NORMAL ECG Heart rateis nothing but the number ofheartbeatsper unit oftimewhich is expressed as beats per minute (bpm) which can vary as the bodys need for oxygen changes, such as duringexercise or sleep. The measurement of heart rate is used bymedical professionalsto assist in thediagnosisand tracking of medical conditions. It is also used by individuals, such asathletes, who are interested in monitoring their heart rate to gain maximum efficiency from their training. TheR waveto R wave interval(RR interval) is the inverse of the heart rate ,that is one divided by RR interval gives the heart rate. Typical healthy resting heart rate in adults is 60-80 bpm which is referred to be normal heart rate,with rates below 60 bpm referred to asbradycardia and rates above 100 bpm referred to astachycardia. Missed ECG: MISSED ECG This can be detected when the R-R interval is twice the actual R-R interval (for normal subjects).Heart pulses misses at some intervals and does not follow the premature heart beat. Bradychardia: BRADYCARDIA This is a critical reduction of heart rate and characterized by normally directed abnormally wide P waves and normal PR interval. Whenever the R-R interval exceeds 1 sec the heart rate goes below 60 and the condition is referred to as Bradychardia. There are three types of Bradychardia conditions based on the characteristics of the ECG wave, they are Sinus bradychardia, Atrio-ventricular nodal bradychardia and ventricular bradychardia respectively. They are discussed below. Sinus bradycardia: SINUS BRADYCARDIA Sinus bradycardias are also called as Atrial bradychardias. This bradychardia condition is usually found in young and healthy adults. The symptoms represent with the individualsrespirations. Theabnormalpattern of eachinhalationcorresponds with the heart rate decreasing.Expirationcauses an increase in the hearts rate of contraction. This is thought to be caused by changes in the vagal tone duringrespiration. Sinus bradycardia is a sinus rhythm of less than 60 bpm. It is a common condition found in both healthy individuals and those who are considered wellconditioned athletes. The reason for this is that their heart muscle has become conditioned to have a higher stroke volume and therefore requires fewer contractions to circulate the same volume of blood. Sick sinus syndromecovers conditions that include severe sinus bradycardia, sinoatrial block, sinus arrest, and bradycardi-tachycardia syndrome (atrial fibrillation, flutter, and paroxysmal supraventricular tachycardia). Atrio ventricular nodal bradycardia: ATRIO VENTRICULAR NODAL BRADYCARDIA An atrio ventricular nodal bradycardia or AV junction rhythm is usually caused by the absence of the electrical impulse from thesinus node. This usually appear on anEKGwith a normal QRS complexaccompanied with an inverted P wave either before, during, or after the QRS complex. An AV junctional escape is a delayed heartbeat originating from anectopicfocus somewhere in theAV junction. It occurs when the rate ofdepolarizationof the SA node falls below the rate of the AV node.This dysrhythmia also may occur when the electrical impulses from the SA node fail to reach the AV node because of SA or AV block.This is a protective mechanism for the heart, to compensate for a SA node that is no longer handling the pace making activity, and is one of a series of backup sites that can take over pacemaker function when the SA node fails to do so. This would present with a longerPR interval. A junctional escape complex is a normal response that may result from excessive vagal tone on the SA node. Pathological causes include sinus bradycardia, sinus arrest, sinus exit block, or AV block. Ventricular bradycardia: VENTRICULAR BRADYCARDIA This picture shows an ECG of a person with an abnormal rhythm (arrhythmia) called an atrioventricular (AV) block. P waves show that the top of the heart received electrical activity. Each P wave is usually followed by the tall (QRS) waves. QRS waves reflect the electrical activity that causes the heart to contract. When a P wave is present and not followed by a QRS wave (and heart contraction), there is an atrioventricular block, and a very slow pulse (bradycardia). PACEMAKER AND ITS SIGNIFICANCE: More than 60% people fall victim to heart attacks in most of the countries around the globe every year and thousands more are critically injured in accidents. Taking care of these patients in special care units involves the usage of specialized equipments like pacemakers along the other important ones. In the past few years electronic pacemaker systems have become the important one in saving lives of cardiac patients whose normal pacing functions have been impaired. Depending on the exact nature of a cardiac dysfunction, a patient may require temporary artificial pacing during the course of treatment or permanent pacing in order to lead an active, productive life after treatment. A device capable of generating artificial pacing impulses and delivering them to the heart is known as a pacemaker system (commonly called a pacemaker) and consists of a pulse generator and appropriate electrodes. Pacemakers are available in a variety of forms. They are mainly divided into two types External pacemakers and Internal pacemakers respectively. EXTERNAL PACEMAKER: External pacemakers are used on the patients with temporary heart irregularities, such as those encountered in the coronary patient, including heart blocks. They are also used for temporary management of certain arrhythmias that occur in the patients during critical postoperative periods and in the patients during cardiac surgery, especially if the surgery involves the values or septum. An external pacemaker usually consists of an externally worn pulse generator connected to electrodes located on or within the myocardium. External pacemakers, which include all types of pulse generators located outside the body, are normally connected through wires introduced into the right ventricle via a catheter catheter. The pulse generator may be strapped to the lower arm of a patient who is confined to bed, or worn at the midsection of an ambulatory patient. We have made the pacemaker which can be divided into two general categories namely Asynchronous pacemaker Synchronous pacemaker ASYNCHRONOUS PACEMAKER: This type of pacemaker is intended for patients having permanent heart blocks. The rate is preset. It can be varied externally within the range of 60 PPM to 180 PPM. Since this pacemaker functions regardless of the patients natural heart rhythm it poses a potential danger because of competition between the patients rhythm and that of the pacemaker. PACING PULSES FROM ASYNCHRONOUS PACEMAKER SYNCHRONOUS PACEMAKER: In patients who have normal heart function most of the time, asynchronous pacing can be extremely dangerous, working against their own physiological pacemaker with the danger of stimulating in the vulnerable period of the T wave, a condition that can result in fibrillation. The demand pacemaker consists of an ECG amplifier and a conventional pacemaker output pulse circuit that has been modified to allow output from the ECG amplifier to inhibit the pulse generator. This pacemaker senses R-waves and its timing and logic circuits count out an elapsed time interval following an R-wave or previously induced pulse. If the intrinsic R-wave does not appear before the elapsed time interval, the ventricle is stimulated. If an R-wave is received, the counter is reset again. This type of pacemaker is used for patients with bradycardia, and it ensures a heartbeat no slower than its set rate. PACING PULSES FROM SYNCHRONOUS PACEMAKER INTERNAL PACEMAKER: Internal pacemaker are implanted within the pulse generator placed in a surgically formed pocket below the right or left clavicle, in the left subcostal area, or in women, beneath the left or right major pectoralis muscle. Internal leads connect to electrodes that directly contact the inside of the right ventricle or the surface of the myocardium. The exact location of the pulse generator depends primarily on the type of the electrode used, he nature of the cardiac dysfunction, and the method (mode) of pacing that may be prescribed .Since there are no external connections for applying power, the pulse generator must be completely self contained, with a power source capable of continuously operating the unit for a period of years. BIO POTENTIAL ELECTRODES: A wide variety of electrodes can be used to measure bio electric events but nearly all can be classified as belonging to one of three basic types; Micro electrodes Skin surface electrodes Needle electrodes All three types of bio potential electrodes have the metal-electrolyte interface. In each case, an electrode potential is developed across the interface, proportional to the exchange of ions to the metal and the electrolytes of the body. MICROELECTRODES: They are used to measure bio electric potentials near or within a single cell.Microelectrodes are electrodes with tips sufficiently small to penetrate a single cell in order to obtain readings from within the cell. The tip must be small enough to permit penetration without damaging the cell. This action is usually complicated by the difficulty of accurately positioning an electrode with respect to a cell. Because of their small surface area, they have impedances well up into the megohms. For this reason, amplifiers with extremely high impedances are required to avoid loading the circuit and to minimize the effects of small changes in interface impedance. SKIN SURFACE ELECTRODES: Skin surface electrodes are used to obtain bio electric potentials from the surface of the body. They are available in various size. Although any type of surface electrode can be used to sense ECG, EMG, EEG potentials, the larger electrodes are usually associated with ECG, since localization of the measurement is not important. Smaller electrodes are used in EEG and EMG measurements. Various types of disposable electrodes have been introduced in recent years to eliminate the requirement for cleaning and care after each use. In general, disposable electrodes are of the floating type with simple snap connectors by which the leads, which are reusable, are attached. Although, some disposable electrodes can be reused several times, their cost is usually low enough that cleaning for reuse is not warranted. They come pre gelled, ready for immediate use. NEEDLE ELECTRODES: To reduce interface impedance and, consequently, movement artifacts, some electroencephalographers use small subdermal needles to penetrate the scalp for EEG measurements. They are also used to measure EMG potentials from a specific group of muscles. They are less susceptible to movement artifacts when compared with surface electrodes as they create an interface beneath the surface of the skin. By making direct contact with the subdermal tissue or the intercellular fluids, these electrodes also seem to have lower impedances than surface electrodes of comparable interface area. Even though needle electrodes have less motion artifacts ,surface electrodes are used to acquire ECG because surface electrodes are more convenient for the patient .Most of the surface electrodes are cheap and reusable. ACQUISITION OF ECG USING 3 LEAD SYSTEM LEAD I CONFIGURATION: ECG sensors measure the time-varying magnitude of electric fields emanating from the heart. ECG values are measured by placing non-invasive electrodes at the surface of the patients skin. For a 3-lead ECG sensor, the electrodes need to be placed in a triangle (Einthoven Triangle) on the patients chest as shown in the figure 11. Each corner of the triangle corresponds to one of the limbs: right hand, left hand, left foot. With the bipolar system, one limb is connected to the positive terminal of the amplifier and another limb to its negative terminal. Three limbs (right arm-RA, left arm-LA and left leg/foot-LL) are used. The right leg was used as earth, to minimize interference. ECG AMPLIFIER: Bioelectric signals have very high input impedance. To stop the signal attenuation, we use Instrumentation Amplifier (AD 624) which also has high input impedance. It should have high gain and low output impedance .In order to remove the common mode signals ,it should have a high Common Mode Rejection Ratio (CMRR of about 90 dB).The potential at the surface of the body ranges from 0 10 mV so the amplifier should have high gain (1000). We use a differential amplifier to amplify the bioelectric signals that occur as a potential difference between two electrodes, the bioelectric signals are applied between the inverting and non-inverting inputs of the amplifier. The signal is therefore amplified by the differential gain of the amplifier. For the interference signal, however, both inputs appear as though they were connected together to a common input source. Thus, the common mode interference signal is amplified only by the much smaller common mode gain. The electrode impedances form a v oltage divider with the input impedance of the differential amplifier. If the electrode impedances are not identical, the interference signals at the inverting and non-inverting inputs of the differential amplifier may be different, and the desired degree of cancellation does not take place. Because, the electrode impedances can never be made exactly equal, the high common mode rejection ratio of a differential amplifier can only be realized if the amplifier has an input impedance much higher than the impedance of the electrodes to which it is connected. There are different lead configurations such as 3-Lead, 5-Lead, 12-Lead for acquiring ECG Signal. We have used 3-Lead system Lead I Configuration. 12-CIRCUIT FOR ECG AMPLIFIER AMPLIFIER OUTPUT SOFTWARE IMPLEMENTATION USING LABVIEW: LabVIEW (short for Laboratory Virtual Instrumentation Engineering Workbench) is a platform and development environment for Visual Programming Language from National Instruments. LabVIEW is a graphical programming environment used by millions of engineers and scientists to develop sophisticated measurement, test, and control systems using intuitive graphical icons and wires that resemble a flowchart. LabVIEW offers unrivaled integration with thousands of hardware devices and provides hundreds of built-in libraries for advanced analysis and data visualization. The LabVIEW platform is scalable across multiple targets and operating systems. LABVIEW is a GUI (Graphical User Interface) which can be used for processing of signals, images and other forms of data. One of the most powerful features LabVIEW offers engineers and scientists is its graphical programming environment. With LabVIEW, one can design custom virtual instruments by creating a graphical user interface on the computer screen through which one can: Operate the instrumentation program Control selected hardware Analyze acquired data Display results One can customize front panels with knobs, buttons, dials, and graphs to emulate control panels of traditional instruments, create custom test panels, or visually represent the control and operation of processes. The similarity between standard flow charts and graphical programs shortens the learning curve associated with traditional, text-based languages. The behavior of the virtual instruments can be determined by connecting icons together to create block diagrams, which are natural design notations for scientists and engineers. With graphical programming, one can develop systems more rapidly than with conventional programming languages, while retaining the power and flexibility needed to create a variety of applications. We have used Lab view to acquire the signal, filtering and do other processing of the ECG signal. The real time signal is given into as input to ELVIS I which acts as the DAQ (data acquisition system).The block diagram of the Lab view implementation is as shown in figure 14. STEPS INVOLVED IN LABVIEW IMPLEMENTATION: The ECG signal from the amplifier (using AD 624) is given as input to DAQ for acquiring the signal in Lab view software. FFT of the ECG signal is obtained and viewed. We can see the frequency content of the ECG signal from the FFT obtained. WE can also see the presence of 50 Hz power line interference in the FFT of raw ECG. A Smoothing filter with following specifications Moving average, Rectangular filter with a half width of 20 is constructed. The Smoothened ECG is viewed. Smoothing Filter is used to remove noise and 50 Hz power line interference. The Smoothened signal is given as input to the Butterworth Band Pass Filter of order 2 and a low cutoff frequency of 5Hz and high cut off frequency of 15Hz.Band Pass Filter is used to separate the QRS complex from the ECG Signal. The output of the Band Pass Filter is differentiated and squared inorder to enhance the QRS complex from the remaining portion of the waveform. The heart rate is calculated using timing and tone measurement block. The block gives the frequency of repetition of the QRS complex. The frequency value is converted into time value by taking inverse of it. Heart rate is calculated as follows. Heart Rate = 60/R-R Interval Example: R-R Interval = 760ms Heart Rate = 60/760ms = 78.94 Beats /Minute If the calculated heart rate is below the normal value, then pacing pulses are produced .This is done by using a case structure. The case structure turns on only when the case is true (Heart Rate is below normal value).Inside the case structure we have a square wave generator. The output of the square wave generator is differentiated and squared. We get a pulse as a result of these operations. The rate and amplitude at which the pulses are produced can be modified easily at run time using controls. Whenever the heart rate is normal, False condition is selected . For false condition, we set the amplitude and frequency of the square wave as zero so that the pacemaker is switched off. The Pacing Pulses generated can also be taken out as an analog voltage from the ELVIS and can be viewed in a DSO. Only voltages in the range +10 volts to -10 volts can be taken out from LABVIEW through ELVIS. PACEMAKER FINAL BLOCK DIAGARM. FRONT PANEL IN LABVIEW ENTIRE SOFTWARE IMPLEMENTATTION We have implemented the case structure and other blocks by studying the general tutorials given in LV BASICS 1 MANUAL and LABVIEWBASICSII_85_ENG CLAD. HARDWARE IMPLEMENTATION: BLOCK DIAGRAM FOR HARDWARE IMPLEMENTATTION BAND PASS FILTER: The amplifier which is used in software implementation (AD 624) is also used here. It is followed by a filter. The amplifier output is around 550 mV. A Filter is a circuit that is defined to pass a specified band of frequencies while attenuating all signals outside this band. Filter networks may be either active or passive. Passive filter networks contain only resistors, inductors and capacitors. Active filters employ transistors or op amps plus resistors, inductors and capacitors. Inductors are often used in active filters, because they are bulky and costly and may have large internal resistive components. Band Pass Filters pass only a band of frequencies while attenuating all frequencies outside the band. A simple high pass filter followed by a low pass filter will form a band pass filter. We have used a band pass filter (0.5Hz 40 Hz) to remove high frequency signals like EMG and low frequency components like Base Line Wandering and motion artifacts. We have used a second order Bu tterworth Filter with -40 db/decade roll-off. For Low Pass Filter, we used 0.5 Hz as the cut off frequency.C1 is chosen as a convenient value between 100 pF and 0.1Â µF.For High Pass Filter, we used 40 Hz as the cut off frequency. We have implemented a Band Pass Filter according to the design given in OPERATIONAL AMPLIFIERS AND LINEAR INTEGRATIONAL CIRCUITS. CIRCUIT AND DESIGN FOR BAND PASS FILTER NOTCH FILTER: A Notch Filter transmits frequencies in the pass band and rejects undesired frequencies in the stop band. In applications where low level signals must be amplified, there may be present one or more of an assortment of unwanted noise signals. Examples are 50, 60 0r 400 Hz frequencies from power lines, 120 Hz ripple from full wave rectifiers, or even higher frequencies from regulated switching type power supplies or clock oscillators. If both signals and signal frequency noise component are passed through a notch filter, only the desired signals will exit from the filter. The noise frequency is notched out. We have designed a active notch filter (using LM 324) to remove 50 Hz Power Line Interference. The amplitude of the acquired ECG signal is around 1 2 V. We got noise free ECG for real time signal acquisition as shown below. CIRCUITAND DESIGN FOR NOTCH FILTER REAL TIME ECG ACQUISITION QRS DETECTOR: In order to extract the QRS Complex from the ECG signal obtained, we use a band pass filter with center frequency of 17 Hz and band width of 6 Hz. The QRS signal obtained from the band pass filter is rectified for comparing with the threshold voltage generated by the detection circuit. The filtered and rectified ECG is stored on a capacitor. This filtered and rectified ECG is compared with the fraction of this voltage. Whenever a threshold voltage is exceeded, the QRS pulse is detected. After the detection of every QRS pulse, the capacitor recharges to a new threshold value after every pulse. CIRCUIT FOR QRS DETECTION MONOSTABLE MULTIVIBRATOR: Monostable Multivibrator generates a single output pulse in response to an input signal. It is also known as One Shot Multivibrator. The time period of the output pulse depends only on the external components (resistors and capacitors) connected to the op-amp. The duration of the input triggering pulse can be longer or shorter than the expected pulse. The duration of the output pulse is represented by the T. Since T can be changed only by changing the resistors and capacitors ,the one shot multivibrators can be considered as a pulse stretcher. This is because the width of the pulse can be longer than the input pulse. In a stable or standby state, the output of the multivibrator is zero or low-level logic. The output of the multivibrator is forced to go high (ËÅ"Vcc) when an external trigger is given. The output stays zero until the next triggering pulse is given. Then the cycle repeats. The monostable multivibrator has only one stable state. Hence, the name monostable. The QRS detector gives a pulse for QRS detected which is given as an input trigger for a monostable multivibrator. This monostable multivibrator is used to produce a positive pulse (amplitude 5V) of desired pulse width for every input triggering (negative edge triggering) from the QRS detector. We had used 555 Timer as a monostable multivibrator. MULTIVIBRATOR OUTPUT Thus, the analog section of the project gets over with multivibrator. The output of the multivibrator is processed using PIC18F 4550 Microcontroller. It marks the beginning of the controller section. MICROCONTROLLER: PIC is a family of Harvard architecture microcontrollers made by Microchip Technology, derived from the PIC1640 originally developed by General Instruments Microelectronics Division. The name PIC initially referred to Programmable Interface Controller, but shortly thereafter was renamed Programmable Intelligent Computer. PICs are popular with developers and hobbyists alike due to their low cost, wide availability, large user base, extensive collection of application notes, availability of low cost or free development tools, and serial programming (and re-programming with flash memory) capability. Like all Microchip PIC18 devices, PIC18F4550 family are available as both standard and low-voltage devices. Standard devices with Enhanced Flash memory, designated with an F in the part number (such as PIC18F4550),accommodate an operating VDD range of 4.2V to 5.5V.Low-voltage parts, designated by LF (such as PIC18LF4550), function over an extended VDD range of 2.0V to 5.5V. Our project uses a standard PIC 18F4550.Hence this microcontroller uses a flash program memory of 24K bytes .It is a 8-bit microcontroller and so they handle data as 8-bit chunks. PICs have a set of registers that function as general purpose ram. Special purpose control registers for on-chip hardware resources are also mapped into the data space. The addressability of memory varies depending on device series and in PIC 18F4550 external code memory is directly addressable which is an exceptional feature compared to baseline and mid line core devices. PICs have a hardware call stack, which is used to save return addresses. The hardware stack is not software accessible on earlier devices, but this changed with the 18F4550 device. Hardware support for a general purpose parameter stack was lacking in early series, but this greatly improved in the 18F4550, making the this device architecture more friendly to high level language compilers. Core features All of the devices in thePIC18F 455 series family incorporate a range of features that can significantly reduce power consumption during operation. Key items include: Alternate Run Modes: By clocking the controller from the Timer1 source or the internal oscillator block, power consumption during code execution can be reduced by as much as 90%. Multiple Idle Modes: The controller can also run with its CPU core disabled but the peripherals still active. In these states, power consumption can be reduced even further, to as little as 4% of normal operation requirements. On-the-Fly Mode Switching: The power managed modes are invoked by user code during o

What is Sin? Essay -- Adam Eve Religion Sinning God Essays Papers

What is Sin?   Ã‚  Ã‚  Ã‚  Ã‚  Adam and Eve, the two that started it all. These two names will remain as a reminder to us forever because of their actions. Genesis chapter two talks about how man was made perfect; flawless and in God’s favor. These two individuals change how mankind would be from that time on. Sin entered the world and things began to change.   Ã‚  Ã‚  Ã‚  Ã‚  Before Adam and Eve’s decision there was no sin or death, because of their actions we now have to deal with both. This brings up the question of where original sin came from. We know that God cannot create evil, so it did not come from Him. He gave man free will. From this man went against God and therefore created sin. Because of this we know have inherited depravity. We can not have the relationship that God intended us to have. We now must make a choice if we are going to follow Him or not. Since Jesus’ death we can now ask Him to enter us through the Holy Spirit; God just does not walk with us like He did with Adam in the garden.   Ã‚  Ã‚  Ã‚  Ã‚  Sin has been defined as many things by many groups throughout the ages. In the Old Testament it was defined as a failure to hit a mark or an attitude of rebellion. In the New Testament it is defined as failing to conform to a standard or as a condition. However, we must decide for ourselves what it means in our own lives. The Holy Spirit will guide us in our definition. Without being taught right and wrong we still are able to decipher between the two.   Ã‚  Ã‚  Ã‚  Ã‚  The Bible uses sin in...

Forecast

Dear Ms. Jones: In order to obtain the forecast for the fifth year we had to gather and analyze the data of the four previous years in your company. The trend (data behaving with the same frequency over the years) that was found was the following: The beginning months of the year are the ones with higher sales. As the months go by, sales continue decreasing until December, where sales come back up again. Now, let me explain how we were able to arrive to this conclusion. First, we calculated the average demand by adding up all the sales of all four years and dividing them by the number of months (48). Then, we came up with the ratio by dividing the sales of each period by the average demand. The seasonal index is then obtained by getting the average of the same month ratios of all four years. For example, the average of all the 4 January ratios. The seasonal index is an average that can be used to compare an actual observation relative to what it would be if we there were no seasonal variation. We arrive to the seasonal forecast by dividing the sales by the seasonal index. Then we get the trend line by adding the intercept plus the x-variable and multiplying that by each period. The trend forecast is what will show you the regular trend of the years. That is obtained by multiplying the trend line times the seasonal index. Here’s a snapshot of the trend of the what the fifth year would look like: And here is another graph showing the trend of the four previous years: As you can tell, the sales behavior repeats itself throughout the years. This trend seems to be very consistent. However, I must warn you that the p-value (percentage defective) in the summary output is significantly higher than . 06, (it is a. 404056) and this means this forecast is not very reliable. I also calculated the percentage errors; the absolute percentage error (MAPE) is 3. 85%. This error was calculated by dividing the absolute error (which we got by subtracting the trend forecast from the sales and using the absolute value of that), by the sales, and then getting the percentage of all the absolute percentage errors. I hope this helps you understand the trend of your sales throughout a year. The most important thing for you to identify is the months where you are having higher sales the possible reasons why those sales decrease as the years comes to an end.

Napoleon Bonaparte DBQ Essay

The ideals of the French Revolution were â€Å"Equality, Liberty, and Fraternity,† but the methods that were used to fulfill these goals were complicated. During the Reign of Terror, about 40,000 people were guillotined because of Maximilien Robespierre. He thought that “Liberty could not be secured unless criminals lose their heads”. Napoleon Bonaparte, a Revolutionary hero, seized control of the government in France in 1799, he was looking to bring peace to the French people by ending the Revolution. For this to be done, he had to be in complete control like a monarch or a dictator. However, the French people still wanted to have some of the privileges they had during the Revolution. Napoleon Bonaparte stabilized and united French society, yet supported the ideals of French Revolution. Peace came to France with Napoleon’s strong rule. After making himself a consul for life, he re-established the French monarchy, naming himself Emperor Napoleon I in 1804. He centralized French government by appointing new officials, made tax collections more efficient, and created a National Bank. He believed that he was chosen by God to be in power and made others believe it through the Napoleon Catechism. It showed the French people that Napoleon was blessed to get the throne. â€Å"Â…he whom God had raised up under difficult circumstances to re-establish the public worship of the holy religion of our fathers and to be the protector of it† (Document 7). Napoleon brought civil rights back to France through codes and treaties that talk about revolutionary ideals. The Napoleonic Code is an example. It recognized the equality of all citizens before the law, protected property rights, safeguarded employers by outlawing trade unions and strikes, and supported religion. Napoleon also signed the Concordat of 1801 with the Pope to reverse the dechristianization attempts made during the â€Å"Republic of Virtue.† Napoleon was not a religious man, he realized that most people needed to practice their faith. This made the Catholic Church an ally and they retained the power to nominate bishops, in return, the Pope agreed to recognize the accomplishments of the Revolution and to not question the ownership of the land that had been distributed back then. Napoleon wanted to be the emperor of all of Europe. This could be foreseen  in Jacques Louis David’s painting of Napoleon’s Crossing the Alps (Document 4), where he was portrayed with power, strength and an iron fist. He was a short man, but had an extremely large ego. He controlled a strong army and conquered much of Europe. His empire was made up of the Italian and German states, Spain, Western Russia (for a short amount of time), and Switzerland. With all his power, he still did not mistreat the citizens of the newly conquered territories. He abolished feudal rights and the internal trade barriers in Spain with his Imperial Decree at Madrid in 1808. Napoleon’s concern for the inhabitants of Westphalia was expressed in his letter to Jerome Napoleon in 1807: â€Å"I want your subjects to enjoy a higher degree of liberty, equality, and prosperity hitherto unknown to the German people† (Document 7). Napoleon’s monarch rules stabilized and unified French society, as well as supported some of the ideals of the French Revolution but, Napoleon considered himself friendless and Count Mole perceived the thought behind Napoleon’s actions as â€Å"nothing but his own gratification, of magnifying himself and his power without limit and without rest† (Document 2). The middle class, who had fought a bloody revolution to end absolute rulers, tolerate Napoleon’s ways. With Napoleon in charge their ideals and rights were safe, they would accepted more his policies and given up some of their basic civil rights. Napoleon Bonaparte, 1769-1821, http://en.wikipedia.org/wiki/Napoleon_I_of_France(October 2008)

History of the HOlocaust

History of the HOlocaust A History of the Holocaust In the book A History of the Holocaust: From Ideology to Annihilation, Rita Botwinick makes many valid points about the Holocaust. She discusses major themes occurring during the Holocaust period of World War II such as intentionalism vs. functionalism and the role of churches during the war. She supports almost all of her arguments with solid research and sources as well as personal observations. Her points are very well thought out and persuasive. I would like to focus on a few of the main ideas that stuck out to me as I read the book. Did Hitler want a Germany that was free of Jews or was his master plan simply to wipe all Jews off the face of the Earth? It is this question that gives rise to the debate of whether Hitler held an intentionalist or a functionalist ideology. The arguments in favor of intentionalism insist that Hitler's intent, even before the war, was to systematically and effectively annihilate the Jewish population from the world.English: Rows of bodies fill the yard of Lager Nor...On the other side of this argument is Functionalism. This ideology holds that Hitler did not set out to annihilate the Jews but that the ridding of their race arose, not from a previously devised plan, but evolved due to many factors over the course of the war. Botwinick argues that Hitler did want to rid Germany of the Jewish race but, that the systematic killing of every Jew was not his initial plan. Thus, she reluctantly sides with the functionalist argument. She does, however, cite evidence that at times contradicts this viewpoint. One such contradiction occurs with the dying statement of Hitler. In this quote he states that although he had lost the war, he had "at least been victorious in the destruction of the Jews" (p.